Specification and model of rotor flowmeter | Doppler flowmeter manufacturer

『Specification and model of rotor flowmeter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)

1. Technical specifications of glass rotor flowmeter

Glass rotor flowmeter ordinary type model nominal diameter mm working pressure MPa basic error limit% range measurement range Liquid gas LZB-2 φ 2 ≤ 1 ± 4 1:10 0.4~4 mL/min 6～60 mL/min 0.6～6 10～100 　　　　　　　　　　　　　　1～10 16～160 　　　　　　　　　　　　　 Ridge lead detection 1.6~16 25~250 LZB-3 φ 3 ≤ 1 ± 4 1:10 2.5~25 40~400 4~40 60~600 Wild Forest 6~60 100~1000 10~100 160~1600 LZB-4 φ 4 ≤ 1 ± 4 1:10 1~10 L/h 16～160 L/h 1.6～16 25～250 　　　　　　　　　　　　　　2.5～25 40～400 　　　　　　　　　　　　　　LZB-6 φ6 ≤1 ± 2.5 1:10 2.5-25 40-400 4-40 60-600 6-60 100-1000 LZB-10 φ 10 ≤ 1 ± 2.5 1:10 6-60 100-1000 10-100 160-1600 16-160 250-2500 LZB-15 φ 15 ≤ 0.6 ± 1.5 1:10 16-160 25-2500 400-4000 40-400 600-6000 LZB-25 φ 25 ≤ 0.6 ± 1.5 1:10 0.04-0.4 m3/h 1～10 m3/h 0.06～0.6 1.6～16 　　　　　　　　　　　　　　0.1～1 2.5～25 　　　　　　　　　　　　　　LZB-40 φ40 ≤0.6 ± 1.5 1:10-4~40 0.16~1.6 6~60 0.25~2.5-- LZB-50 diameter 50 ≤ 0.6 ± 1.5 1:10 0.4~4 10~100 0.6~6 16~160 1~10-- LZB-80 diameter 80 ≤ 0.4 ± 1.5 1:101: 5 1~10 50~500 1.6~16 80~400 7~30-- LZB-100 diameter 100 ≤ 0.4 ± 1.5 1:10 5-25 120-600 8-40 200-1000 12-60-- Note: The above specifications of flow meters (DN2-10) are all side inlet and side outlet, connected by hoses or threads, and equipped with needle type flow regulating valves on the lower base. The liquid flow rate of the glass rotor flowmeter is calibrated with 20 ℃ clean water, and the gas flow rate is calibrated with 20 ℃ and 101325Pa air. According to user requirements, special flow meters can be made, with a maximum flow rate of 120m3/h for DN100 diameter and a maximum atmospheric flow rate of 3500m3/h. Special correction calibration can also be performed. Model nominal diameter mm working press

Specification and model of rotor flowmeter

ure MPa basic error limit% range measurement range Liquid gas LZB-15F φ 15 ≤ 0.6 ± 4 1:10 0.016-0.16 m3/h 0.25～2.5 m3/h 0.025～0.25 0.4～4 　　　　　　　　　　　　　　0.04～0.4 0.6～6 　　　　　　　　　　　　　　LZB-25F φ25 ≤0.6 ± 2.5 1:10 0.04~0.4 1~10 0.06~0.6 1.6~16 0.1~1 2.5~25 LZB-40F φ 40 ≤ 0.6 ± 2.5 1:10-- -- --0.16~1.6 4~40 0.25~2.5 6~60 LZB-50F φ 50 ≤ 0.6 ± 2.5 1:10-- -- --0.4~4 1~10 0.6~6 1.6~16 LZB-80F φ 80 ≤ 0.4 ± 2.5 1:101:5:5-10 50-250 1.6-16 80-400 LZB-100F φ 100 ≤ 0.4 ± 2.5 1:10:5-5 120-1600 8-40 200-1000 Note: Corrosion resistant types with nominal diameter ≤ 10mm need to be customized without needle type regulating valves. According to customer requirements, we can produce corrosion-resistant flow meters with a higher level of precision. The material model of the contact part between the flowmeter and the measured medium is the base and valve needle flange stop float guide rod sealing packing LZB-2LZB-3LZB-4LZB-6LZB-10 brass chrome plated - polytetrafluoroethylene (PTFE) agate or stainless steel (1Cr18Ni9Ti) - acid and alkali resistant rubber (IV-1) LZB-15LZB-25LZB-40- cast iron lining acid and alkali resistant rubber (IV-1) polytetrafluoroethylene (PTFE) stainless steel (1Cr18Ni9Ti) stainless steel (1Cr18Ni9Ti) acid and alkali resistant rubber (IV-1) LZB-50LZB-80LZB-100- cast iron internally coated with amino baked paint cast iron internally coated with amino baked paint stainless steel. 1Cr18Ni9Ti stainless steel (1Cr18Ni9Ti) acid alkali resistant rubber (IV-1) LZB - □□ B or LZB - □□ B0 flanges or bases, valve needles, floats and guide rods, support plates, casings and bolts are all made of stainless steel Cr18Ni9Ti， The model is LZB - □□ B. If the overcurrent material is stainless steel 0Cr18Ni12Mo2Ti (316), LZB □□ B0 ne

Specification and model of rotor flowmeter | Doppler flowmeter manufacturer

1. Technical specifications of glass rotor flowmeter

『SILVER Official Website SERVICE』