Current position >About Us
1. Which is larger, LPM or CMH?
LPM is larger. According to the flow conversion table, 1lps=60lpm, 1lps=3.6cmh, which makes it easy to compare the sizes. CMH stands for cubic meter per hour (m/h), which means cubic meter per hour. However, CMH is generally only used to indicate the air volume in the wind system, and water volume is still mostly expressed in cubic meters per hour. PM measurement unit name: liter/minute LPM, also known as Library of Parameterized Modules, is a set of macro functional modules that come with Alteras FPGA/CPLD design software QuartusII, such as phase-locked loops (PLLs), LVDS, digital signal processing (DSP) modules, etc. These functions are optimized for Altera devices, and designers use these modules without consuming the logic resources of the devices (LogicCell).
2. What do the two options for enabling AHCI on the BISO of the Yingtai B75 motherboard mean and how do I set them up
Aggressive LPM Support refers to the recommended "USB Link Layer Power Management" support. Enabling this option allows the computer to connect USB devices more energy-efficiently, reducing power consumption. Regarding the SATA Controller Speed options, "Gen1" signifies the first-generation SATA technology standard (SATA1.0), while "Gen3" represents the third-generation standard (SATA3.0). Here are the differences between the two:1. Bit Stream Rate and Transfer Rate: - SATA1.0 has a bit stream rate of 1.5Gbps, which corresponds to a working clock frequency of 1.5GHz. Due to 8b/10b encoding, one 8-bit (1B) data is transmitted every 10 clock cycles, resulting in a maximum data transfer rate of 150MB/s. - SATA3.0 has a targeted bit stream rate of 6.0Gbps, with a maximum data transfer rate expected to reach 600MB/s.2. Maximum Cable Length and Anti-Interference Ability: - SATA3.0 supports a maximum cable length of 2 meters, whereas SATA1.0 supports a maximum length of 1 meter. - SATA cables are full-duplex serial cables that facilitate simultaneous data transmission in both directions. They have two pairs of data wires, allowing for two-way data transfer simultaneously. - The SATA cable connectors are 7-pin connectors, featuring four data signal pins (A+, A-, B+, B-) along with three ground pins. Longer cables are more susceptible to interference. SATA 3.0 serial cables have better anti-interference capabilities than SATA1.0 serial cables.3. Compatibility: - The SATA3.0 standard is backward compatible with SATA1.0. However, the reverse is not true, as SATA1.0 cannot be compatible with SATA3.0 standards.
3.CMH Equivalent to slpm
slpm stands for standard liter per minute in English, which is the flow rate value of standard liters per minute. It is no different from the usual lpm, but slpm stipulates that it must be the standard liter under normal temperature and pressure, while lpm refers to the current liter of the substance Agree with 4 | Comment (3) CMH stands for cube meter hour (m/h), which means cubic meters per hour. However, CMH is generally only used to indicate the air volume in the wind system, and water volume is still mostly expressed in cubic meters per hour Simplify 100SLPM × 60 ÷ 1000=6CMH