1. What does flowing through mean?

The fracturing fluid is then flowing through the Coriolis flow meter. Then, the fracturing fluid flows through the Coriolis flow meter

2.The diluent is flowed through the piston ring gap (44) toward at least one airflow hole in the fuel nozzle. Make the diluent flow through the piston ring gap towards at least one airflow hole in the fuel nozzle

3.In fact, Chua calculated, it would behave like a resistor that could "remember" what current had flowed through it before (see diagram). In fact, Chua has calculated that it will operate like a resistor that can remember the current that has passed through it before

4.Because all data communication flowed through the mainframe, a single point of failure for the entire system was a possible risk. Because all data runs through the host, any slight malfunction is dangerous for the entire system

5.Free electrons naturally stored in the fruit flowed through wires connected to the pieces of metal. Free electrons are naturally stored in fruits and flow to metals connected by wires.

2. What is the meaning of the fan flow unit CMF?

This refers to the fact that the Coriolis Mass Flow Meter (CMF) is a novel instrument that directly and precisely measures the mass flow rate of fluids, and its unit is; It is ft3/min, 1m3/s=2119ft3/min

3. What is the unit of cmf?

1. cmf is the Coriolis Mass Flow Meter CMF. The Coriolis Mass Flow Meter is a novel instrument that directly and accurately measures fluid mass flow. The main structure adopts two parallel U-shaped tubes, and the bent parts of the two tubes vibrate slightly towards each other. The straight tubes on both sides will vibrate accordingly, that is, they will approach or open at the same time, that is, the vibration of the two tubes is synchronous and symmetrical.

2、 If fluid is introduced into the pipe while synchronously vibrating, causing it to flow forward along the pipe, the pipe will force the fluid to vibrate up and down together with it. In order to resist this forced vibration, the fluid will give the tube a reaction force perpendicular to its flow direction, which is called the Coriolis effect force. Under this force, the vibration of the tube is not synchronized, and there will be a difference in the timing of vibration between the inlet and outlet sections of the tube, which is called the phase time difference. This difference is directly proportional to the mass flow rate of the fluid flowing through the pipe. If the magnitude of this time difference can be detected through the circuit, then the size of the mass flow rate can be determined.

3、 This type of flowmeter is called the Coriolis direct mass flowmeter, and its biggest difference from dozens of conventional volumetric flowmeters currently in use in the world is the size of the mass it measures, measured in kg/h. A flow meter with a unit of mass such as kilograms is more accurate and constant than a volumetric flow meter with a unit of volume such as liters or cubic meters. Because quality follows the law of conservation. The invention of Coriolis mass flowmeter is the result of decades of hard work in the technology industry. It not only has accuracy, repeatability, and stability, but also has no flow blocking elements or movable parts in the fluid channel, so it has good reliability, long service life, and can measure the flow rate of high viscosity fluids an

『SILVER Official Website SERVICE』